Plate compactor, Pile driver, Stump driver, Wheel compactor, Auger... Malaguti

PLATE COMPACTOR

Designed to compact any surface, the plate compactor is particularly useful for compacting infill in trenches after cables and pipes have been laid. It provides a solid, uniform surface that lasts over time. The attachment is complete with fixed coupling to the machine.
Suitable for all needs, models range from the smallest version of 1.5 tonnes up to a maximum capacity of 35 tonnes.

They get compacting jobs done fast, with benefits in terms of safety, especially when used in a trench, since there is no need for the operator to be directly in the working area, and results are quick and clean.

The plate compactor can be combined with various optionals for optimal adaptation for jobs of all kinds.

• Play Video

PILE DRIVER WITH GRAPPLE

Compacting plates can be equipped with kits for the vibratory driving of poles – pole-centring collar– and grapple for gripping wood or concrete-steel poles. This compound tool is ideal for landslip containment works, for laying fences, in agriculture for planting vineyards and orchards, for preparing a solid foundation for pavings, and for many similar uses. The attachment is complete with fixed coupling to the machine.

The downward pressure applied by the machine provides the force necessary for pile-driving. A single operator, working from the cab of the excavator, is able to pick up the pole with the hydraulic clamp, position it, and then drive it into the ground using the vibrating system, with unbeatable safety and efficiency.

• Play Video

PILE DRIVER WITHOUT GRAPPLE

The pile driver is ideal for landslip containment works, for laying fences, and in agriculture for planting vineyards and orchards.

The attachment is complete with fixed coupling to the machine. The downward pressure applied by the machine provides the force necessary for pile-driving.

STUMP GRINDER

Fast and effective, this attachment is useful for grinding stumps; the shredding wheel swings from side to side and gradually eats into the stump until it has been completely eliminated. The direct drive with piston motor delivers the highest cutting speed and thus optimal productivity and efficiency. The tungsten carbide teeth are extremely tough.

Specially designed for excavators from 1.5 to 13 tonnes in three different models, this stump grinder can also be used on difficult gradients. Ideal for grinding even stumps with problematical access, such as those in gardens and parks. An agile solution for grinding stumps of any size.

The attachment is complete with single pin coupling or fixed coupling to the machine.

WHEEL COMPACTOR

Designed for compacting the bottoms and infills of trenches, this attachment provides a solid, uniform surface that lasts over time.

Fitted with tapered roller bearings, wheel compactors are designed to ensure uniform operation, favouring a high degree of compacting. Available in 4 variants from a minimum of 1.5 tonnes up to a maximum of 20 tonnes.

The high strength steel and hardwearing bearings ensure a long attachment lifetime. The attachment is complete with fixed coupling to the machine.

• Play Video

AUGER

Rugged and high-performing, the auger can be fitted with different types of bits and extensions for the most widely varying jobs, from drilling the ground to splitting tree roots and stump.

The attachment is complete with single pin coupling or fixed coupling to the machine.

Our augers are highly versatile and can be fitted with various bits, suitable for jobs of all kinds.